Welcome to the Built Right Pool Heaters manual! This guide provides essential information for installing, operating, and maintaining your pool heater. It covers key features, models like BR135 XW, and ensures safe, efficient use of your unit. Proper setup and maintenance will maximize performance and longevity. Let’s dive into the details to get your pool heater up and running smoothly!
1.1 Understanding the Manual Structure
This manual is divided into clear sections for easy navigation. It begins with an introduction, followed by installation, operation, maintenance, and troubleshooting guides. Each section is further divided into sub-sections, such as pre-installation requirements and common issues. The structure ensures users can quickly locate information, whether they’re setting up, operating, or maintaining their Built Right Pool Heater. This logical flow simplifies the learning process.
1.2 Key Features of Built Right Pool Heaters
Built Right Pool Heaters are designed for efficiency and durability. Models like the BR135 XW offer advanced features such as energy-saving technology, easy-to-use controls, and robust construction. They include tie-down straps for secure installation, locking covers for safety, and a heat pump limited factory warranty. These features ensure reliable performance, making them a top choice for pool and spa heating solutions. Energy efficiency and longevity are prioritized.
Installation and Setup Guide
This section outlines the steps for installing your Built Right Pool Heater, including securing the unit with tie-down straps and connecting necessary components. Follow carefully for safe setup.
2.1 Pre-Installation Requirements
Before installing your Built Right Pool Heater, ensure the site is level, well-ventilated, and accessible. The unit must be placed near the pool, protected from direct sunlight, and connected to a suitable electrical supply. Verify local building codes and ensure all necessary permits are obtained. Proper placement and preparation are crucial for safe and efficient operation.
2.2 Step-by-Step Installation Process
Start by connecting a two-wire 22 AWG conductor cable to the P/S terminals on the control board. Attach the other end to an open heater port on The Attendant. Ensure the unit is secured using the Built Right strap kit, anchoring it to the deck if required. Follow the manual’s wiring diagram for accurate connections and refer to local codes for compliance. Proper installation ensures safe and efficient operation.
2.3 Securing the Unit with Tie-Down Straps
Attach the Built Right strap kit to each side of the heater and anchor it to the deck for stability. Ensure the straps are tightly secured to prevent movement. This step is crucial for safety and compliance with local codes. The kit is available upon request and ensures your unit remains firmly in place during operation.
Operating the Built Right Pool Heater
Learn to operate your Built Right Pool Heater efficiently! This section covers turning the heater on/off, switching between pool and spa modes, and adjusting temperature settings for optimal performance.
3.1 Turning the Heater On/Off
Turning your Built Right Pool Heater on/off is straightforward. Ensure the pump is running and the system is properly set up. Flip the power switch to activate or deactivate the heater. Always refer to the manual for specific model instructions and safety precautions to ensure smooth operation and longevity of your unit.
3.2 Switching Between Pool and Spa Modes
Switching between pool and spa modes on your Built Right Pool Heater is simple. Use the control panel to select the desired mode, ensuring the system adjusts to the correct temperature settings. Always confirm the mode change in the display and consult the manual for specific model instructions to optimize performance and efficiency for your pool or spa.
3.3 Adjusting Pool Temperature Settings
Adjusting the pool temperature on your Built Right Pool Heater is straightforward. Access the control panel and use the temperature adjustment buttons to set your desired temperature. The system will automatically heat or cool to maintain the selected temperature. Ensure the temperature is within the recommended range (typically 80–104°F) for optimal comfort and energy efficiency. Always refer to your manual for specific model instructions.
Maintenance and Troubleshooting
Regular maintenance ensures optimal performance and longevity. Check filters, inspect components, and address issues promptly. Troubleshooting common problems like low flow or temperature errors is essential for efficient operation.
4.1 Regular Maintenance Tasks
Ensure your Built Right Pool Heater operates efficiently by performing routine checks. Clean filters monthly to prevent blockages. Inspect the unit for corrosion or damage, and replace worn-out parts promptly. Check water flow rates, as optimal efficiency occurs at 60 GPM. Regularly inspect electrical connections and ensure the unit is securely tied down with straps to meet local codes. Schedule professional servicing annually to maintain performance and warranty compliance.
4.2 Common Issues and Solutions
If your Built Right Pool Heater isn’t performing optimally, check for common issues like low water flow, which reduces efficiency. Ensure filters are clean and unblocked. If the heater won’t turn on, verify power supply and control settings. For error codes, consult the manual or contact support. Regularly inspect tie-down straps and electrical connections to prevent shutdowns. Annual professional servicing can resolve many issues before they escalate.
Warranty and Technical Support
Built Right Pool Heaters offers a Heat Pump Limited Factory Warranty, covering defects in materials and workmanship. For assistance, contact their support team at (941) 505-1600 or visit their office in Punta Gorda, FL. They provide troubleshooting guidance and service options to ensure your heater operates efficiently.
5.1 Heat Pump Limited Factory Warranty Details
The Heat Pump Limited Factory Warranty covers defects in materials and workmanship for Built Right Pool Heaters. It applies to models installed in Florida after September 1, 2010. The warranty ensures your unit is free from defects, providing peace of mind. Contact their support for specific terms and conditions to understand coverage details and claim processes effectively.
5.2 Contacting Built Right Pool Heaters Support
For assistance, contact Built Right Pool Heaters at 28110 Challenger Blvd, Punta Gorda, FL 33982, or call (941) 505-1600. Their support team is ready to help with installation, maintenance, or troubleshooting. You can also reach out via their website or visit their office at 8260 Pascal Dr, Punta Gorda, FL 33950-4726. They are committed to ensuring your pool heater operates efficiently and effectively.
Energy Efficiency and Cost Savings
Built Right Pool Heaters are designed for optimal energy efficiency, reducing operational costs. By maintaining proper water flow rates (60 GPM) and using heat pump technology, you save energy while keeping your pool warm, making it an eco-friendly and cost-effective solution for year-round use.
6.1 Optimizing Heater Efficiency
Built Right Pool Heaters achieve peak efficiency at 60 GPM water flow. Lower flow rates reduce efficiency by about 1%. Regular maintenance, proper sizing, and consistent operation ensure optimal performance. Use a pool cover to minimize heat loss and reduce energy consumption, especially during cooler months, to maximize cost savings and extend your swimming season.
6.2 Understanding Energy Consumption
Built Right Pool Heaters are designed to be cost-effective, with heat pumps saving $100-$300 annually in electricity costs when run in heat pump mode. Energy consumption depends on factors like pool size, temperature settings, and usage patterns. Proper installation, regular maintenance, and optimal water flow rates (60 GPM for peak efficiency) ensure minimal energy use while maintaining performance.
Advanced Features and Settings
Built Right Pool Heaters offer advanced features like locking covers to reduce heat loss and winterizing options for seasonal maintenance, ensuring efficient and secure operation year-round.
7.1 Winterizing the Unit
Winterizing your Built Right Pool Heater is crucial for seasonal maintenance. Drain all water from the system, disconnect hoses, and cover the unit to protect it from frost. Use tie-down straps if required by local codes to secure the heater. This ensures optimal performance and prevents damage during colder months. Follow the manual for detailed winterization steps.
7.2 Using the Locking Covers
Locking covers are essential for protecting your Built Right Pool Heater from debris and reducing heat loss. Install them securely to ensure a proper fit. Covers prevent unauthorized access and maintain energy efficiency. Regularly inspect and clean the covers to avoid blockages; Follow the manual for specific installation and maintenance instructions to optimize performance and longevity of your pool heater system.
Safety Precautions
Always follow electrical safety guidelines and ensure proper venting to avoid hazards. Keep the unit secure with tie-down straps and maintain proper installation to prevent accidents and ensure safe operation.
8.1 Electrical Safety Guidelines
Always turn off power before performing maintenance. Ensure all electrical connections are secure and meet local codes. Avoid exposing the unit to water. Use a GFCI-protected circuit. Never modify wiring without professional assistance. Ensure proper grounding to prevent electrical hazards. Regularly inspect cords and connectors for damage. Follow manufacturer instructions for electrical installations. Keep children away from electrical components. Adhere to all safety standards to prevent accidents and ensure reliable operation.
8.2 Venting Requirements
Proper venting is essential for efficient and safe operation. Install the heater in a well-ventilated area, avoiding confined spaces. For indoor setups, ensure appropriate venting systems are in place. Follow manufacturer guidelines for vent pipe installation. Improper venting can lead to reduced efficiency and potential safety hazards. Always consult local building codes for compliance. Regularly inspect vents for blockages or damage to ensure optimal performance and safety.
Models and Specifications
This section provides a detailed overview of Built Right Pool Heater models, including technical specifications, features, and applications. It helps users choose the right model for their needs.
9.1 Overview of Built Right Pool Heater Models
Built Right offers a range of pool heater models, including BR80 XW, BR100 XW, BR115 XW, BR135 XW, S7 BR100 S7, and S7 BR115 S7. These models cater to different pool sizes and heating needs, ensuring efficient and reliable performance. Each model is designed with advanced features to optimize energy use and provide consistent heating. This guide helps you understand their unique capabilities and select the best fit for your pool.
9.2 Technical Specifications
The technical specifications of Built Right pool heaters include details on power requirements, voltage, and flow rates. Models like BR135 XW operate efficiently at 60 GPM, ensuring optimal performance. They are designed for durability and energy efficiency, with features like tie-down straps for secure installation. These specs ensure compatibility with various pool setups, providing reliable heating solutions for different needs.
User FAQs
Frequently asked questions about Built Right Pool Heaters include troubleshooting issues, installation tips, and maintenance advice. Common queries address heater operation, pump compatibility, and winterizing the unit effectively.
10.1 Common Questions About Heater Operation
Common questions include how to turn the heater on/off, whether the pump is strong enough, and why the heater isn’t producing heat. Users also ask about battery replacements, mode switching, and winterizing. Ensure proper installation, check power connections, and refer to the manual for troubleshooting. Contact support if issues persist for personalized assistance.
10.2 Troubleshooting Tips
For issues, check power connections, ensure proper water flow, and verify heater settings. If the heater isn’t producing heat, inspect for blockages or low flow. Refer to the manual for error codes and solutions. Winterize the unit correctly to avoid damage. Contact Built Right support if problems persist after basic troubleshooting steps;
Thank you for purchasing a Built Right Pool Heater. Follow the manual’s guidelines for optimal performance and longevity. Regular maintenance ensures efficiency and extends the heater’s life, providing years of enjoyable pool experiences. Happy swimming!
11.1 Final Tips for Optimal Performance
For peak performance, maintain proper water flow and temperature settings. Regularly clean filters and inspect the unit. Use locking covers to prevent unauthorized access and ensure energy efficiency. Schedule annual professional check-ups to address potential issues early. By following these tips, your Built Right Pool Heater will deliver consistent, reliable heating for years to come. Happy swimming!
11.2 Importance of Proper Maintenance
Regular maintenance is crucial for extending the lifespan of your Built Right Pool Heater. Clean filters, check electrical connections, and inspect for wear. Addressing issues promptly prevents costly repairs. Proper care ensures efficient heating and safe operation, guaranteeing years of reliable service. Always refer to the manual for specific maintenance tasks and schedules to keep your unit in top condition.